# Tube tool, rounded end? **URL:** \ **Category:** Tips, Tutorials and Help\ **Created:** [August 4, 2023, 4:38pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829 "2023-08-04T16:38:21Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Kyle](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@Kyle](https://forum.nomadsculpt.com/u/Kyle)\ **Post date:** [August 4, 2023, 4:38pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829/1 "2023-08-04T16:38:21Z")
I see that others have asked about rounding the end of a tube, so for instance, If I wanted to create fingers for a character using the tube tool, I could choose to have round ends instead of using the inflate tool and smoothing it down or something like that. the last time this was "requested was 2 years ago, and a lot has changed, so I was wondering if it was in there an I was missing it, or if it isn’t a feature. Thanks for any help! ---
**Author:** ![stephomi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/stephomi/32/19583_2.png) [@stephomi](https://forum.nomadsculpt.com/u/stephomi)\ **Post date:** [August 4, 2023, 5:00pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829/2 "2023-08-04T17:00:59Z")
It’s not there yet ---
**Author:** ![milkybee](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/milkybee/32/12274_2.png) [@milkybee](https://forum.nomadsculpt.com/u/milkybee)\ **Post date:** [August 4, 2023, 5:37pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829/3 "2023-08-04T17:37:46Z")
you can try lowering the and upping the subdivision to make rounded tubes ![Untitled 18](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/3X/8/c/8c998439cf577ee0f192059745ca7f90659f2ec3.png) ---
**Author:** ![Kyle](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@Kyle](https://forum.nomadsculpt.com/u/Kyle)\ **Post date:** [August 4, 2023, 5:48pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829/4 "2023-08-04T17:48:31Z")
oh hey, that’s interesting! I’ll give that a shot. thanks a lot ---
**Author:** ![LAR\_DE\_SOUZA](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/lar_de_souza/32/20000_2.png) [@LAR\_DE\_SOUZA](https://forum.nomadsculpt.com/u/LAR_DE_SOUZA)\ **Post date:** [July 9, 2024, 8:39pm UTC](https://forum.nomadsculpt.com/t/tube-tool-rounded-end/11829/5 "2024-07-09T20:39:15Z")
Ah!! I’d been trying this with no success and it turns out my Tube Topology was too high! Thanks!! Very useful!