# Tube tool does not follow the path 1.46

**URL:** <https://forum.nomadsculpt.com/t/tube-tool-does-not-follow-the-path-1-46/2261>\
**Category:** Bug Report\
**Created:** [April 2, 2021, 7:57am UTC](https://forum.nomadsculpt.com/t/tube-tool-does-not-follow-the-path-1-46/2261 "2021-04-02T07:57:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Costorella\_Stefano](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/costorella_stefano/32/1551_2.png) [@Costorella\_Stefano](https://forum.nomadsculpt.com/u/Costorella_Stefano)\
**Post date:** [April 2, 2021, 7:57am UTC](https://forum.nomadsculpt.com/t/tube-tool-does-not-follow-the-path-1-46/2261/1 "2021-04-02T07:57:08Z")

</div>

Bug reports

[https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/7/72afa8f2071499f76ed804d7b80b7e73ed1aae13.MP4](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/7/72afa8f2071499f76ed804d7b80b7e73ed1aae13.MP4)
 
[https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/b/b90b006758247465dc6845dd61b7d9b564e96316.MP4](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/b/b90b006758247465dc6845dd61b7d9b564e96316.MP4)
  
I’m just trying to make a spiral, but nomad simplifies the shape for me and doesn’t respect my well-curved line. I tried everything with the two snapping modes, it’s the same. In the stroke parameters I played with the 3 sliders it doesn’t work, I tried with and without a stylus, it’s the same. I tried it out with the web demo and it works almost the way I want it to. (see picture)  
 ![image](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/e/e4457e507083a10113fce58bceef1a3270f64594.jpeg)

---

<div class="post-metadata">

**Author:** ![stephomi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/stephomi/32/19583_2.png) [@stephomi](https://forum.nomadsculpt.com/u/stephomi)\
**Post date:** [April 2, 2021, 12:08pm UTC](https://forum.nomadsculpt.com/t/tube-tool-does-not-follow-the-path-1-46/2261/2 "2021-04-02T12:08:16Z")

</div>

> [@Paths being over-simplified in web demo?](https://forum.nomadsculpt.com/t/paths-being-over-simplified-in-web-demo/2234/4):
>
> Note that 1.46 is already released and has the new version. The main advantage is that it works with “snap every point”. Basically: the first version didn’t produce any curve (control points), so it was precise and “snap all” was working fine. But no further curve editing in 3d was possible. then I added a simple 2d curve fitting algorithm. But with 2 issues: the curve fitting works in 2d, so “snap all” was broken since depth wasn’t taken into account (only the control points are sn…

Je vais m’énerver 🙂

—

(La version web est toujours en avance)

---

<div class="post-metadata">

**Author:** ![Costorella\_Stefano](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/costorella_stefano/32/1551_2.png) [@Costorella\_Stefano](https://forum.nomadsculpt.com/u/Costorella_Stefano)\
**Post date:** [April 2, 2021, 12:16pm UTC](https://forum.nomadsculpt.com/t/tube-tool-does-not-follow-the-path-1-46/2261/3 "2021-04-02T12:16:47Z")

</div>

Pardon je ne voulais pas t’offenser ça m’avait échapper lol 🙂  
Sorry I didn’t want to offend you that had escaped me lol 🙂