# Tube Falloff feature

**URL:** <https://forum.nomadsculpt.com/t/tube-falloff-feature/4577>\
**Category:** Feature Request\
**Tags:** nomadsculpt\
**Created:** [November 14, 2021, 11:18pm UTC](https://forum.nomadsculpt.com/t/tube-falloff-feature/4577 "2021-11-14T23:18:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Keith\_Douglas](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/keith_douglas/32/5360_2.png) [@Keith\_Douglas](https://forum.nomadsculpt.com/u/Keith_Douglas)\
**Post date:** [November 14, 2021, 11:18pm UTC](https://forum.nomadsculpt.com/t/tube-falloff-feature/4577/1 "2021-11-14T23:18:44Z")

</div>

The tube tool is awesome, but has it’s limitations. Would it be at all possible to include a falloff feature to the tube setting to allow creators to build custom shaped tubes?

---

<div class="post-metadata">

**Author:** ![Josepmy](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/josepmy/32/6428_2.png) [@Josepmy](https://forum.nomadsculpt.com/u/Josepmy)\
**Post date:** [November 14, 2021, 11:30pm UTC](https://forum.nomadsculpt.com/t/tube-falloff-feature/4577/2 "2021-11-14T23:30:58Z")

</div>

I subscribe too

---

<div class="post-metadata">

**Author:** ![Softz](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/softz/32/6152_2.png) [@Softz](https://forum.nomadsculpt.com/u/Softz)\
**Post date:** [November 15, 2021, 11:08am UTC](https://forum.nomadsculpt.com/t/tube-falloff-feature/4577/3 "2021-11-15T11:08:59Z")

</div>

I am not sure what you mean by Falloff? doesnt feel like the correct wording there.  
However “Custom shaped tube” this feature request is a well known one :? lets hope this happen someday

---

<div class="post-metadata">

**Author:** ![knacki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/knacki/32/1297_2.png) [@knacki](https://forum.nomadsculpt.com/u/knacki)\
**Post date:** [November 15, 2021, 11:54am UTC](https://forum.nomadsculpt.com/t/tube-falloff-feature/4577/4 "2021-11-15T11:54:16Z")

</div>

Even though OT doesn‘t meant fall off like this, but manipulating multiple tube points would be nice. An extra option in tube tool, called move.  
By increasing brush size, you can affect multiple points with a soft falloff, like move brush, but for tube points.The bigger, the more points will be moved, till you move all.  
In this mode probably only moving is possible, no point welding, no radius adjust.  
That would be a great feature.