# Trim tool issues

**URL:** <https://forum.nomadsculpt.com/t/trim-tool-issues/18363>\
**Category:** Feature Request\
**Tags:** nomadsculpt, tutorial, lowpoly\
**Created:** [December 4, 2024, 9:00pm UTC](https://forum.nomadsculpt.com/t/trim-tool-issues/18363 "2024-12-04T21:00:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Manny\_Acharya](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/manny_acharya/32/9435_2.png) [@Manny\_Acharya](https://forum.nomadsculpt.com/u/Manny_Acharya)\
**Post date:** [December 4, 2024, 9:00pm UTC](https://forum.nomadsculpt.com/t/trim-tool-issues/18363/1 "2024-12-04T21:00:13Z")

</div>

Is there was we can fix trim too cuts ? It’s doesn’t do neat cuts when you try to cut something in 90 degrees .  
It’s super frustrating as I have to cut my sculptures in different part before 3d print and jonining them to one piece . These extra flang creates lot of sanding cutting works in production.

 ![IMG_4577](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/3X/8/8/88f59267395746bd68de77da8eefe06df9a36290.png)

---

<div class="post-metadata">

**Author:** ![Holger\_Schoenischka](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/holger_schoenischka/32/3934_2.png) [@Holger\_Schoenischka](https://forum.nomadsculpt.com/u/Holger_Schoenischka)\
**Post date:** [December 4, 2024, 9:13pm UTC](https://forum.nomadsculpt.com/t/trim-tool-issues/18363/2 "2024-12-04T21:13:12Z")

</div>

If you want sharp angles, then you should set boolean when trimming / splitting in the tool settings.