# Scale won’t work after latest update unless multi-touch is deselected **URL:** \ **Category:** Bug Report\ **Created:** [January 18, 2021, 5:15pm UTC](https://forum.nomadsculpt.com/t/scale-won-t-work-after-latest-update-unless-multi-touch-is-deselected/1221 "2021-01-18T17:15:13Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Drmabuse](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Drmabuse](https://forum.nomadsculpt.com/u/Drmabuse)\ **Post date:** [January 18, 2021, 5:15pm UTC](https://forum.nomadsculpt.com/t/scale-won-t-work-after-latest-update-unless-multi-touch-is-deselected/1221/1 "2021-01-18T17:15:14Z")
Move works fine in multi-touch and so does rotate but scale does nothing with finger and iPad pencil. As soon as multi-touch is disabled scale works fine as before. The gizmo works ok though ---
**Author:** ![stephomi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/stephomi/32/19583_2.png) [@stephomi](https://forum.nomadsculpt.com/u/stephomi)\ **Post date:** [January 18, 2021, 5:22pm UTC](https://forum.nomadsculpt.com/t/scale-won-t-work-after-latest-update-unless-multi-touch-is-deselected/1221/2 "2021-01-18T17:22:41Z")
That’s not a bug, the Transform tool with “multi-touch” enabled is meant to be used with 2 fingers. So you scale with 2 fingers (pinching). There’s a little UX trick in that you can use one finger with Translate in case Rotate is disabled. I forgot to add the similar logic with Scale: Scale with one finger if Translate and Rotate are disabled. ---
**Author:** ![Drmabuse](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@Drmabuse](https://forum.nomadsculpt.com/u/Drmabuse)\ **Post date:** [January 18, 2021, 5:29pm UTC](https://forum.nomadsculpt.com/t/scale-won-t-work-after-latest-update-unless-multi-touch-is-deselected/1221/3 "2021-01-18T17:29:43Z")
Thanks. I thought I was just scaling everything as you do on the screen with two fingers to place/move objects. Maybe there is a less confusing way this could be done? Still love your software. I got caught out by the “trim bug” too though, but I read the other post re: the workaround. Thanks again and keep up the good work!