# Scale help

**URL:** <https://forum.nomadsculpt.com/t/scale-help/8179>\
**Category:** Lounge\
**Created:** [September 11, 2022, 3:45am UTC](https://forum.nomadsculpt.com/t/scale-help/8179 "2022-09-11T03:45:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wyvern](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/wyvern/32/11779_2.png) [@Wyvern](https://forum.nomadsculpt.com/u/Wyvern)\
**Post date:** [September 11, 2022, 3:45am UTC](https://forum.nomadsculpt.com/t/scale-help/8179/1 "2022-09-11T03:45:19Z")

</div>

Hey I’m trying to make some scales on a snake, been using the brush and crease tool is there a better way?

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/3/37d453bd290294346e13c6200308ad0bda65765d.jpeg)

---

<div class="post-metadata">

**Author:** ![RogerRoger](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/rogerroger/32/33580_2.png) [@RogerRoger](https://forum.nomadsculpt.com/u/RogerRoger)\
**Post date:** [September 11, 2022, 5:03am UTC](https://forum.nomadsculpt.com/t/scale-help/8179/2 "2022-09-11T05:03:19Z")

</div>

Get a brush alpha with scales on it and use the stamp tool. May be a bit easier.

You could also create your own snake scale alpha. And then make a tillable stamp from it.

---

<div class="post-metadata">

**Author:** ![Holger\_Schoenischka](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/holger_schoenischka/32/3934_2.png) [@Holger\_Schoenischka](https://forum.nomadsculpt.com/u/Holger_Schoenischka)\
**Post date:** [September 11, 2022, 5:15am UTC](https://forum.nomadsculpt.com/t/scale-help/8179/3 "2022-09-11T05:15:55Z")

</div>

https://www.youtube.com/embed/PokpmJnMG98?feature=oembed&wmode=opaque&list=PLMiwb2mOovgx84CyRq1Mp9KGGW1pLVGun