# Knackis Quick Nomad Tips 🖖

**URL:** <https://forum.nomadsculpt.com/t/knackis-quick-nomad-tips/3496>\
**Category:** Lounge\
**Created:** [July 24, 2021, 12:37pm UTC](https://forum.nomadsculpt.com/t/knackis-quick-nomad-tips/3496 "2021-07-24T12:37:49Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![knacki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/knacki/32/1297_2.png) [@knacki](https://forum.nomadsculpt.com/u/knacki)\
**Post date:** [November 7, 2021, 8:07pm UTC](https://forum.nomadsculpt.com/t/knackis-quick-nomad-tips/3496/4 "2021-11-07T20:07:57Z")

</div>

**Controllable Outline**

There was a cool outline workaround on Discord from Lazyguy  
Works very well:

Duplicate mesh.  
Create layer  
Use inflate with grab dynamic  
Go to material = always unlit, inverse culling, two sided OFF  
Adjust layer strength  
Create another layer for changing color  
Create another layer for sculpting adjustments

Now you can control line thickness via first inflate layer. And combine with anything you want.

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/3/39b186304281635105663570c1b9d49abc0791ca.jpeg)

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/nomadsculpt/original/2X/a/a0bace87f823950a4ab0269b3f84c8d3f7124f7b.jpeg)

---

_[View the full topic](https://forum.nomadsculpt.com/t/knackis-quick-nomad-tips/3496)._