# Filling a hollow space

**URL:** <https://forum.nomadsculpt.com/t/filling-a-hollow-space/9534>\
**Category:** Lounge\
**Created:** [January 3, 2023, 12:29am UTC](https://forum.nomadsculpt.com/t/filling-a-hollow-space/9534 "2023-01-03T00:29:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MPD-DIY-Guy](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@MPD-DIY-Guy](https://forum.nomadsculpt.com/u/MPD-DIY-Guy)\
**Post date:** [January 3, 2023, 12:29am UTC](https://forum.nomadsculpt.com/t/filling-a-hollow-space/9534/1 "2023-01-03T00:29:03Z")

</div>

I downloaded a base from MMF. The creator made the bottom hollow for resin printing. I want to print with FDM and need to fill the hollow space with a honeycomb. Is that easily accomplished with Nomad, and if so, how?

---

<div class="post-metadata">

**Author:** ![RogerRoger](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/rogerroger/32/33580_2.png) [@RogerRoger](https://forum.nomadsculpt.com/u/RogerRoger)\
**Post date:** [January 3, 2023, 1:07am UTC](https://forum.nomadsculpt.com/t/filling-a-hollow-space/9534/2 "2023-01-03T01:07:10Z")

</div>

Make a honeycomb.  
Place it in the base where you want it.  
Select the base and honeycomb.  
Vowel remesh.

Done.

---

<div class="post-metadata">

**Author:** ![MPD-DIY-Guy](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@MPD-DIY-Guy](https://forum.nomadsculpt.com/u/MPD-DIY-Guy)\
**Post date:** [January 3, 2023, 2:14am UTC](https://forum.nomadsculpt.com/t/filling-a-hollow-space/9534/3 "2023-01-03T02:14:00Z")

</div>

Thank you very much. I had some kind of brain block, but I knew there was a simple solution. This forum is great.