# Fill brush

**URL:** <https://forum.nomadsculpt.com/t/fill-brush/24231>\
**Category:** Feature Request\
**Created:** [March 31, 2026, 7:58am UTC](https://forum.nomadsculpt.com/t/fill-brush/24231 "2026-03-31T07:58:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chenji](https://avatars.discourse-cdn.com/v4/letter/c/8dc957/32.png) [@chenji](https://forum.nomadsculpt.com/u/chenji)\
**Post date:** [March 31, 2026, 7:58am UTC](https://forum.nomadsculpt.com/t/fill-brush/24231/1 "2026-03-31T07:58:52Z")

</div>

I hope you can add a **fill brush** similar to Blender

---

<div class="post-metadata">

**Author:** ![Bezzo](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/bezzo/32/18150_2.png) [@Bezzo](https://forum.nomadsculpt.com/u/Bezzo)\
**Post date:** [April 3, 2026, 7:54am UTC](https://forum.nomadsculpt.com/t/fill-brush/24231/2 "2026-04-03T07:54:36Z")

</div>

There is “fill holes” in the topology misc menu.

There are also a few other methods such as smoothing with Dyntopo on to close the mesh & also using the trim tool with hole filling set to legacy or fill mode 🙂