# Division X input \<6 for tube please

**URL:** https://forum.nomadsculpt.com/t/division-x-input-6-for-tube-please/2014
**Category:** Feature Request
**Created:** [March 19, 2021, 6:59am UTC](https://forum.nomadsculpt.com/t/division-x-input-6-for-tube-please/2014 "2021-03-19T06:59:40Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![knacki](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/knacki/32/1297_2.png) [@knacki](https://forum.nomadsculpt.com/u/knacki)
#### Post date: [March 19, 2021, 6:59am UTC](https://forum.nomadsculpt.com/t/division-x-input-6-for-tube-please/2014/1 "2021-03-19T06:59:40Z")

</div>

I don‘t know if this is blocked by intention.  
Numerical input of division x \<6 is blocked for tube and cylinder. It always stays on 6.  
But one can use the sliders. So it is just a very tiny thing. More a question if this has a reason?

---

<div class="post-metadata">

### Author: ![stephomi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/stephomi/32/19583_2.png) [@stephomi](https://forum.nomadsculpt.com/u/stephomi)
#### Post date: [March 19, 2021, 10:39am UTC](https://forum.nomadsculpt.com/t/division-x-input-6-for-tube-please/2014/2 "2021-03-19T10:39:10Z")

</div>

Ah indeed, I’ll check that.