# Creating cables in nomad sculpt
**URL:** https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364
**Category:** Lounge
**Created:** [October 10, 2020, 9:19am UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364 "2020-10-10T09:19:59Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@The7Mirrors](https://forum.nomadsculpt.com/u/The7Mirrors)
#### Post date: [October 10, 2020, 9:19am UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/1 "2020-10-10T09:19:59Z")
I post new video of me creating cables in nomad sculpt 🔌
[Creating cables in nomad sculpt](https://youtu.be/C8Lo0YI4kIU)
---
### Author:  [@Bertil](https://forum.nomadsculpt.com/u/Bertil)
#### Post date: [October 10, 2020, 2:15pm UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/2 "2020-10-10T14:15:06Z")
Excellent work. It’s a vexing problem for some of us…
---
### Author:  [@MickymX](https://forum.nomadsculpt.com/u/MickymX)
#### Post date: [December 10, 2020, 9:13pm UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/3 "2020-12-10T21:13:38Z")
Gréât work and explanation but with this method, is there a way to make a loop ?
I’m looking for a method to make horn efficiently 🙂
---
### Author:  [@SporkFuMaster](https://forum.nomadsculpt.com/u/SporkFuMaster)
#### Post date: [December 10, 2020, 10:33pm UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/4 "2020-12-10T22:33:37Z")
I’ve found that moving a tube too far will warp it. It could be done if you want to spend a lot of time pulling at little pieces to nudge it into place, or masking and rotating bit by bit. Besides pulling a horn out with the Move brush, you can try splitting a torus in half and rotating one part slightly. Merge the two parts and you’ve got the base to a curved horn.
---
### Author:  [@The7Mirrors](https://forum.nomadsculpt.com/u/The7Mirrors)
#### Post date: [December 11, 2020, 5:49am UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/5 "2020-12-11T05:49:04Z")
I was saving The torus method for another video 😂
---
### Author:  [@SporkFuMaster](https://forum.nomadsculpt.com/u/SporkFuMaster)
#### Post date: [December 11, 2020, 6:53am UTC](https://forum.nomadsculpt.com/t/creating-cables-in-nomad-sculpt/364/6 "2020-12-11T06:53:04Z")
Actually, I think you already did.
Yeah, I had to go back and find it, but you did for the suspension video. I saw it after I had created the screw threads for a screw before I realized I only needed the screw head prior to starting a steampunk kind of wasp. Never saved the screw threads since they wouldn’t be needed. Seemed pretty similar to what I had attempted which is why I remembered it.
I’ve seen all the videos so far. That’s how I knew the gizmo could step to specific angles while I did the cogs (thanks for that by the way, could be another video for you). So keep those videos coming. I know I’m likely missing a few things in there.