# Crease brush - add/sub inverted

**URL:** <https://forum.nomadsculpt.com/t/crease-brush-add-sub-inverted/3152>\
**Category:** Bug Report\
**Created:** [June 22, 2021, 4:38pm UTC](https://forum.nomadsculpt.com/t/crease-brush-add-sub-inverted/3152 "2021-06-22T16:38:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mlnngton](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/mlnngton/32/4279_2.png) [@mlnngton](https://forum.nomadsculpt.com/u/mlnngton)\
**Post date:** [June 22, 2021, 4:38pm UTC](https://forum.nomadsculpt.com/t/crease-brush-add-sub-inverted/3152/1 "2021-06-22T16:38:56Z")

</div>

Bug reports:

as of latest my Crease brush has the add/sub logic inverted. Sub raises, Add lowers

---

<div class="post-metadata">

**Author:** ![stephomi](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/stephomi/32/19583_2.png) [@stephomi](https://forum.nomadsculpt.com/u/stephomi)\
**Post date:** [June 22, 2021, 6:01pm UTC](https://forum.nomadsculpt.com/t/crease-brush-add-sub-inverted/3152/2 "2021-06-22T18:01:39Z")

</div>

It was always the case, it didn’t change.

The only change that changed recently is the default sub value, it was the only tool that defaulted to sub (thus your confusion).

---

<div class="post-metadata">

**Author:** ![mlnngton](https://dub1.discourse-cdn.com/flex005/user_avatar/forum.nomadsculpt.com/mlnngton/32/4279_2.png) [@mlnngton](https://forum.nomadsculpt.com/u/mlnngton)\
**Post date:** [June 25, 2021, 7:18pm UTC](https://forum.nomadsculpt.com/t/crease-brush-add-sub-inverted/3152/3 "2021-06-25T19:18:39Z")

</div>

Really?. Oh could have swore when I did a crease in sub it would push down not raise. But either way tool works fine. Just the wording sub I imagine it to push down 🙂